Some Potential Fixes For A Dysfunctioned Wavlink AC1200 

One of the greatest extenders on the market is the Wavlink AC1200 WiFi Extender. You may increase your WiFi range without having to relocate or add a new router. Thanks to this wireless WiFi revolutionary device. However, occasionally getting an error message stating that your Wavlink WiFi Extender isn’t working during the Wavlink AC1200 setup can be aggravating. Here are some potential fixes for a Wavlink WiFi Extender that isn’t functioning properly:

Restart Your Wireless Router and Wavlink Extender

First, try turning off both the extender and the router if you are having trouble connecting your Wavlink. Before turning them back on, wait a moment, then try connecting once more. It usually solves the problem. Continue to the following solution, nevertheless, if the opposite result occurs. 

Change the Location of Your WiFi Range Extender

It’s crucial to put your extender in the center of your house, preferably close to the middle. Additionally, it’s crucial to avoid placing your Wavlink Extender next to obstructions like walls. Furniture or other technological impediments like cordless phones, televisions, or WiFi routers are a few examples. This is due to the possibility that they will obstruct your router’s signal. As a result, it affects the Wi-Fi network performance of your extender. Additionally, it can possibly stop both devices from operating at all. 

Note: It is recommended to use multiple extenders if your home is large and you want better coverage in every area. One can be put close to the area where it will be used the most.

Verify The SSID (Network Name)

Check the SSID of both your computer and the Wavlink Wi-Fi extender as soon as your Wavlink extender stops functioning. You can do this by heading over to your system’s WiFi settings and visiting the 192.168.10.1 wifi repeater setup portal. When you join a wireless network, the network name you see is the SSID. Your Wavlink Wi-Fi extender won’t function properly if it’s not input properly. Additionally, the SSID must exactly match the one used by your computer or mobile device.

Before attempting anything more, check to see if your computer or mobile device’s preferred Wi-Fi hotspot has been updated if you recently changed it. 

Resetting and Re-Configure the Wavlink WiFi Extender

You might try resetting your Wavlink WiFi Extender if it’s not functioning. After that, you must complete the Wavlink extender setup. Your extender’s settings will be erased throughout this operation, and they will be reset to their factory defaults. It’s a quick process that just takes a few minutes to complete. Take these actions:

• To get your extender’s lights to flash, press and hold the Reset button for 5 seconds. 
• Before moving on to the following step, wait 30 seconds until all lights cease flashing or shutting off.
• Your WiFi Extender’s power must be unplugged.
• Before plugging back in, give yourself at least 10 seconds.
• Use the password listed on the underside of the sticker to log in to the new network name (SSID) displayed on the screen. 

Upgrade the Wavlink WiFi Extender’s Firmware

You can update the firmware on your Wavlink WiFi extender if it isn’t functioning properly. This will update the gadget with new features and resolve any bugs. It might also fix issues with your gadget. From the Wavlink extender login page or their mobile app, updating their firmware is simple.

Press the WPS Setup Button On the Extender

On the back of both your router and Wavlink WiFi Extender is where you’ll find the WPS button. Press the WPS button on both devices, then wait for the light to blink to connect them:

It will either be a small WiFi symbol-shaped button on your router or a larger button with multiple horizontal lines. Simply seek for a button that says WPS when lit up because some routers may have several of them that are different designs.

There is only one “WPS” button on the face of your extender. The light won’t come on if this doesn’t initially work. After a little interval in between each try, press it once again. You can also lookout here for wavlink router setup.

Key Takeaways

You must restart your wireless router to resolve the Wavlink AC1200 extender’s malfunction. When doing so, make sure you are within the extender’s field of vision.

Your Wavlink AC1200 Extender is attempting to connect to the network but is unable to do so owing to some problem if it is blinking red. It can help to relocate the device closer to your wireless router and try again after a few minutes or wait an hour before trying again.

Reconfigure the Wavlink WiFi Extender after resetting it.  Use the updated credentials to ensure a successful connection the following time. If you enter the wrong SSID name or password, the “Wavlink extender not working” warning may appear on the screen.

The best solutions to the Wavlink AC1200 Setup not working problem are those mentioned above. You can try these suggestions, and if you continue to experience problems, you can get in touch with customer service for more help.