MAXIMIZING YOUR WIFI SIGNAL STRENGTH WITH LINKSYS EXTENDER SETUP

The Linksys extender is a device that comes with robust features reliable for your excessive internet requirement. After attaching it to the router, there will be an improvement in signal strength and stability to a great extent. So, get this device carefreely and set that up using these simple setup points. Follow these tips precisely for a successful and hassle-free process if you are a non-technical user. 

WPS Method For Extender Setup

As you get the Linksys extender, you will need to configure it before starting to use it. So, in the first and foremost setup method, you only have to get a router that is WPS compatible. So that you can do your Linksys WiFi extender setup with less effort and within less time. Fortunately, if your router supports the WPS feature then choose this process with the most priority. 

• Choose the power socket for the extender closer to the router’s outlet. 
• Wait till the extender completes its rebooting and becomes ready for setup.
• Check the power lights on both devices after plugging them in.
• Then, press the WPS button from the extender’s panel and hold it. 
• Once the extender’s LED starts blinking, push the router’s WPS button.
• Wait again and let both devices make a strong connection. 
• Soon, the stable lights will denote that the setup is successfully complete. 

Other Setup Methods For Extender

If in any case, your router is not compatible with the WPS button, then try the other setup methods. These are the web-based and WiFi app setup approaches that require accessing the Linksys extender login panel. But, before moving to any of these methods, make sure to collect the prerequisites that you need during the process. 

Pre-requirements For Setup 

• The extender’s login credentials that you can collect from a manual guide.
• Also, take the Linksys default web and IP addresses from the same guide.
• You must know the existing router’s SSID network name and password.
• Any device with access to the compatible web browser and app store. 
• An ethernet wire is optional if you want to make a wired connection.

Web-Based Setup

In this method, just open your preferred web browser on the device that is connected to the Linksys network. But, for connectivity, either choose the wireless network of Linksys or use an ethernet wire for a wired connection. Then, search for the Linksys’ web or IP address in the browser’s URL space to access the Linksys extender login portal. 

Now, enter the username and password of your Linksys extender and click on the Sign-in button. As a consequence, you will be redirected by the browser on the Linksys wifi extender setup page. Choose the network from there, insert its password, and click on the Extend button. In this way, the setup process will be complete. 

App Setup For Extender

If you are not accessible to the web portal in any circumstances then try the final setup method. For this process, use your smartphone either Android or iOS, and launch its app store to get the app. Search for the Linksys WiFi app there and choose the official one to install on that device. 

• Once you are done with the app installation, open it and click on the terms and conditions.
• Thereafter, access the login window and enter the username and password there in the right sequence.
• In the next step, go to the setup window and choose the network from the list.
• In the end, follow the on-screen directions shown by the Linksys WiFi app to finish the process.

Note: If you are going to use a mesh setup of Linksys that is Velop, you can use the same app. That platform will also allow you to do the Linksys velop setup app in the right manner. 

Relocate The Extender

After completing the setup process, you must change its placement to get better WiFi coverage at your place. So, just unplug the extender and move it to that area where you are facing WiFi dead spots to clear them. But, try to place it at the center of your house and two feet above the ground floor. Also, avoid placing it near electrical and metallic appliances that can cause signal interruptions. 

Thus, in this simple way, you will succeed in setting up your extender in a perfect way. However, if you face any difficulties or errors during the process, then contact our technical experts. Share your queries with them and get the relevant solutions also read about Velop Devices Not Connecting To Closest Node.